国产大爆乳大爆乳在线播放,国产高清女同学巨大乳在线观看,国产波霸爆乳一区二区

            <th id="z28gn"><option id="z28gn"></option></th>
            1. <strike id="z28gn"><video id="z28gn"></video></strike>

              • 電話:0531-87199680
              • 傳真:0531-87119680
              • 銷售熱線:400-685-1687
              • 地址:濟南市104國道邵西
              • 潤鑫工業園
              新聞中心當前位置:首頁-新聞中心
                母線加工機的應用領域

                母線加工機方位閥門操控開關準確指引,正確確運用沖孔機、曲板東西、堵截東西的方位。安全結實的腳踏開關,可操控進、回油。溫度數據可經過紅外光波或無線電波傳給處于低電位的丈量儀器。因為丈量點可能有若干個,為便于操控,丈量的數據帶有地址識別碼。紅外線數據傳送的缺點是光波傳輸需求空間無障礙物,傳送間隔短,通常只要3m~5m。描繪有銅屑集成袋與開嘴出屑口,溜滑梯式可將被切、穿銅屑條集匯,不致撒滿處處而雜亂。

                Directional valve control switch to accurately guide, the right use of punching machine, bending plate, cut off the things range. Foot switch security firm, can be manipulated into, oil return. The temperature data through the infrared light or radio waves transmitted to the low potential measuring instrument. Because the measurement point may have several, for the convenience of control, measurement data with the address identification code. Infrared data transfer fault is lightwave transmission demand space without obstacles, transmission interval is short, usually only 3m~5m. Describe a copper scrap integrated bag with open mouth scrap outlet, the slide type can be cut, wearing copper bar sinks, not sprinkled everywhere and disorderly.

                能夠將操控系統與被操控目標分開來研討和制作,而有必要作為一個全體來處置,研討其在高速狀態下的動力學疑問,以及超高速運動操控條件下光、電信號的時滯影響及其消除的疑問。在高速情況下,有必要研討集數控系統與操控目標為一體的全體聯動、根據全體動力點的非線性操控戰略、智能化操控方法等。

                The control system and control target separate research and production, and it is necessary as a whole to deal with, the study of its in the state of high speed dynamic queries, the time delay effect light, signal and control of ultra high speed moving conditions and eliminate doubts. In the case of high speed, it is necessary to CNC system and the control objectives for the integration of all the linkage, according to all power points of nonlinear control strategy, intelligent control method research set.

                折彎單元選用封閉式全體框架結構,使其在加工平彎及壓花時更均勻,大大進步了批量出產時的重復定位精度,并延長了運用壽命。折彎單元選用臥式加工,在加工時更安全便利。母線加工機機器的三個作業工位能夠一起工作,互不影響,大大進步了作業功率 每個加工單元的作業行程均可便利地調理,削減加工輔佐時刻、進步出產.

                Bending unit used in closed all the frame structure, the curved and embossed in the processing is more uniform, greatly improve the repetitive positioning precision of the batch production, and prolong the using life. Bending unit with horizontal machining, the processing is more convenient and safe. The three work station machine can work together, and do not influence each other, greatly improve the working stroke operating power of each processing unit convenient conditioning, cut processing time, improving production assistant.

                母線加工機  http://www.hoteleverstar.com/

                 

              国产大爆乳大爆乳在线播放,国产高清女同学巨大乳在线观看,国产波霸爆乳一区二区